HOME >> PRODUCTS >> STANDARDIZED SPRINGS / STRAIGHT TYPE SPRINGS / TAPER TYPE SPRINGS / HELPER SPRINGS
■ To install the standardized springs, please use the height adjustable parts (sold separately), or with TEIN's height adjustable shock absorber kit. Please refer to each pages for details.
■ All of TEIN's standardized springs are ground on both ends.
■ We use SWOSC-KV silicon chrome metal (JIS standard) to pursue the maximum quality of high tension and endurance for all standardized springs.
■ Stable quality, endurance, and high performance is maintained by special procedure (cooling formation).
■ The straight type springs are measured by inner diameter. and, specified spring seat is required. The outer diameter changes with alignment.
■ These springs are tapered and the bottom diameter is I.D.70mm, with two types of top diameters of I.D.90mm, I.D.100mm. These are standardized springs which have been developed to adopt with original upper mounts for original double wishbone and multi - link suspension system. Tapered Type Springs have the following outstanding characteristics.
■ Ideal for N1 and other vehicles whose upper mounts cannot be replaced under regulations.
■ By eliminating the upper spring seat, we have achieved low cost and adequate bump stroke.
■ It eliminates the damage to upper mount and other noise by maintaining same force input positions as original products.
■ As it is tapered, spring stroke can be maintained better than the straight type with same spring coefficient and length.
■ By setting 2 springs in a series, variable spring rate can be achieved.
■ It gives unlimited setting range with wide winding point weight set ups.
■ The A spring is a series twin spring, and the B spring can be selected from straight type with I.D.70mm or tapered type springs. A variable spring is achieved through changing over from original spring rate to B spring rate.
■ The spacer spring seat is necessary for installation with the A spring.
Springs most suitable for rally and off-road uses are available.
Please refer to TYPE Gr.N ( F.R.S. Spec / Standard Spec ) pages for more information.
We can produce made-to-order springs to the desired shape, size and/or rate. Click here for details.
Lineup & Price list
MSRP excl Tax JPY 16,000/set (2 springs)
 
Inside Diameter I.D.60 I.D.65mm
Free Length 200 175 200 225 250 300
Spring Rate Parts # Parts # Parts # Parts # Parts # Parts #
Stroke Stroke Stroke Stroke Stroke Stroke
3.0     SL030-01200
140
     
4.0 SN040-01200**
131
  SL040-01200
134
  SM040-01250
163
 
5.0   SQ050-01175
114
SL050-01200
125
  SM050-01250
153
 
6.0   SQ060-01175
107
SL060-01200
125
SV060-01225
128
   
7.0 SQ070-01175
103
SL070-01200
121
  SM070-01250
148
SK070-01300**
165
8.0   SQ080-01175
97
SL080-01200
111
SV080-01225
127
   
9.0   SQ090-01175
99
SL090-01200
105
     
10.0   SQ100-01175
96
SL100-01200
113
SV100-01225
118
   
12.0   SQ120-01175
93
SL120-01200
105
SV120-01225
113
   
14.0   SQ140-01175
91
SL140-01200
104
     


Inside Diameter I.D.70mm
Free Length 150 175 200 225 250 300
Spring Rate Parts # Parts # Parts # Parts # Parts # Parts #
Stroke Stroke Stroke Stroke Stroke Stroke
2.5         SC025-01250
176
 
3.0       SY030-01225
153
SC030-01250
168
 
4.0 SA040-01150
103
  SB040-01200
135
SY040-01225
144
SC040-01250
162
 
5.0 SA050-01150
97
SW050-01175
112
SB050-01200
125
SY050-01225
138
SC050-01250
152
SD050-01300
184
6.0 SA060-01150
95
SW060-01175
110
SB060-01200
128
SY060-01225
135
SC060-01250
146
 
7.0 SA070-01150
96
SW070-01175
107
SB070-01200
125
SY070-01225
131
SC070-01250
147
 
8.0 SA080-01150
91
SW080-01175
103
SB080-01200
116
SY080-01225
127
SC080-01250
146
 
9.0 SA090-01150
88
SW090-01175
98
SB090-01200
114
     
10.0 SA100-01150
85
SW100-01175
96
SB100-01200
108
SY100-01225
120
   
12.0 SA120-01150
82
SW120-01175
93
SB120-01200
111
     
14.0 SA140-01150
82
  SB140-01200
105
     
16.0 SA160-01150
78
  SB160-01200
103
     
18.0 SA180-01150
78
         
20.0     SB200-01200
96
     

**Discontinued and only available while supplies last.
MSRP excl Tax JPY 20,000/set (2 springs)
Inside Diameter I.D.70mm-90mm I.D.70mm-100mm
Free Length 175 200
Spring Rate Parts # Parts #
Stroke Stroke
6.0   SJ060-01200
128

MSRP excl Tax JPY 10,000/set (2 springs)
Parts # Inside Diameter Free Length Stroke Solid Length Adhesion Load Spring Rate
CR019-01080 I.D.65mm 80mm 57mm 23mm 116Kgf 1.9Kgf/mm
CR005-01080 I.D.65mm 80mm 62mm 18mm 31kgf 0.5kgf/mm
SS016-01080 I.D.70mm 80mm 58mm 22mm 98Kgf 1.6Kgf/mm
CS004-01095 I.D.70mm 95mm 76mm 19mm 27kgf 0.3kgf/mm
 
MSRP excl Tax JPY 14,000/set (2 springs)
(For the race and the Gymkhana)
Parts # Inside Diameter Free Length Stroke Solid Length Adhesion Load Spring Rate
RH024-A1050 I.D.58mm 50mm 29mm 21mm 85Kgf 2.8Kgf/mm
RH023-A1070 I.D.58mm 70mm 47mm 23mm 111Kgf 2.3Kgf/mm
RH022-B1030 I.D.65mm 30mm 12mm 18mm 34Kgf 2.7Kgf/mm
RH022-B1045 I.D.65mm 45mm 27mm 18mm 74Kgf 2.7Kgf/mm

**Discontinued and only available while supplies last.
Drop us a line, ask us any questions!
Click Here